Loading…
Be the Light Youth Convention has ended
"One Lord, one faith, one baptism..."
Venue: Maker\'s Space clear filter
Wednesday, April 23
 

9:00am MDT

3-D Printing FULL
Wednesday April 23, 2025 9:00am - 10:00am MDT
Maker's Space
3-D Printing 
Speakers
avatar for Mr. Nick Barlow ('27)

Mr. Nick Barlow ('27)

Sophomore, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
avatar for Mr. Levi Cawley ('27)

Mr. Levi Cawley ('27)

Sophomore, Centennial Academy
Wednesday April 23, 2025 9:00am - 10:00am MDT
Maker's Space Classroom Wing
  Workshop, Vocational: Let Us

9:00am MDT

Embroidery Machine Basics: A Peer-Led Workshop FILLING
Wednesday April 23, 2025 9:00am - 10:00am MDT
Maker's Space
This one-hour, peer-led workshop is designed to give a hands-on introduction to the basics of using an embroidery machine, blending theory with practical demonstration and interactive learning  
ObjectivesBy the end of this workshop, participants will be able to:
  • Understand the fundamental components and operation of an embroidery machine.
  • Follow basic safety procedures when using the machine.
  • Prepare and load a simple embroidery design using the machine’s software.
  • Observe a live demonstration of the machine in action.
Speakers
avatar for Ms. ReNae Hammon ('25)

Ms. ReNae Hammon ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 9:00am - 10:00am MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

9:00am MDT

Laser Engraving 101: A Peer-Led Workshop FULL
Wednesday April 23, 2025 9:00am - 10:00am MDT
Maker's Space
This 60-minute, peer-led workshop is designed to provide a hands-on introduction to laser engraving, ensuring that all participants gain both practical skills and an understanding of safe operation.
Objectives
By the end of this workshop, participants will be able to:
  • Understand the basic operation and safety protocols of a laser engraver.
  • Identify key components of a laser engraving machine.
  • Safely operate the laser engraver to complete a small project.
Speakers
avatar for Mr. Caleb Timpson ('25)

Mr. Caleb Timpson ('25)

Senior, Centennial Academy
avatar for Mr. Jacob Dockstader ('26)

Mr. Jacob Dockstader ('26)

Junior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 9:00am - 10:00am MDT
Maker's Space Classroom Wing
  Workshop, Vocational: Let Us

10:30am MDT

3-D Printing FULL
Wednesday April 23, 2025 10:30am - 11:00am MDT
Maker's Space
3-D Printing 
Speakers
avatar for Mr. Nick Barlow ('27)

Mr. Nick Barlow ('27)

Sophomore, Centennial Academy
avatar for Mr. Levi Cawley ('27)

Mr. Levi Cawley ('27)

Sophomore, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 10:30am - 11:00am MDT
Maker's Space Classroom Wing
  Workshop, Vocational: Let Us

10:30am MDT

Laser Engraving 101: A Peer-Led Workshop FULL
Wednesday April 23, 2025 10:30am - 11:30am MDT
Maker's Space
Laser engraving in the maker's space. 
Speakers
avatar for Mr. Jacob Dockstader ('26)

Mr. Jacob Dockstader ('26)

Junior, Centennial Academy
avatar for Mr. Caleb Timpson ('25)

Mr. Caleb Timpson ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 10:30am - 11:30am MDT
Maker's Space Classroom Wing
  Workshop, Vocational: Let Us

11:00am MDT

Cutting Edge Creations: A Vinyl Cutting Machine Workshop FULL
Wednesday April 23, 2025 11:00am - 12:00pm MDT
Maker's Space
This session led by student instructors has been crafted with the primary aim of providing attendees with a practical and immersive initiation into the realm of vinyl cutting. This workshop is structured to merge interactive discussions with hands-on demonstrations, ensuring that participants not only grasp the theoretical aspects but also get a firsthand experience of the vinyl cutting process. This 60-minute, student-led demonstration is designed to give a practical introduction to vinyl cutting, combining hands-on demonstration and interactive discussion.
Lesson ObjectivesBy the end of this workshop, participants will be able to:
  • Understand the primary functions and components of a vinyl cutting machine.
  • Follow safety protocols and proper handling procedures.
  • Observe a live demonstration of the vinyl cutting process.
Speakers
avatar for Ms. ReNae Hammon ('25)

Ms. ReNae Hammon ('25)

Senior, Centennial Academy
avatar for Ms. Summer Jeffs ('27)

Ms. Summer Jeffs ('27)

Sophomore, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 11:00am - 12:00pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

11:00am MDT

Embroidery Machine Basics: A Peer-Led Workshop FULL
Wednesday April 23, 2025 11:00am - 12:00pm MDT
Maker's Space
This one-hour, peer-led workshop is designed to give a hands-on introduction to the basics of using an embroidery machine, blending theory with practical demonstration and interactive learning  
ObjectivesBy the end of this workshop, participants will be able to:
  • Understand the fundamental components and operation of an embroidery machine.
  • Follow basic safety procedures when using the machine.
  • Prepare and load a simple embroidery design using the machine’s software.
  • Observe a live demonstration of the machine in action.
Speakers
avatar for Ms. ReNae Hammon ('25)

Ms. ReNae Hammon ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 11:00am - 12:00pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

11:30am MDT

Laser Engraving 101: A Peer-Led Workshop FULL
Wednesday April 23, 2025 11:30am - 12:00pm MDT
Maker's Space
This 60-minute, peer-led workshop is designed to provide a hands-on introduction to laser engraving, ensuring that all participants gain both practical skills and an understanding of safe operation.
Objectives
By the end of this workshop, participants will be able to:
  • Understand the basic operation and safety protocols of a laser engraver.
  • Identify key components of a laser engraving machine.
  • Safely operate the laser engraver to complete a small project.
Speakers
avatar for Mr. Jacob Dockstader ('26)

Mr. Jacob Dockstader ('26)

Junior, Centennial Academy
avatar for Mr. Caleb Timpson ('25)

Mr. Caleb Timpson ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 11:30am - 12:00pm MDT
Maker's Space Classroom Wing
  Workshop, Vocational: Let Us

1:00pm MDT

3-D Printing FULL
Wednesday April 23, 2025 1:00pm - 2:00pm MDT
Maker's Space
3-D Printing 
Speakers
avatar for Mr. Nick Barlow ('27)

Mr. Nick Barlow ('27)

Sophomore, Centennial Academy
avatar for Mr. Levi Cawley ('27)

Mr. Levi Cawley ('27)

Sophomore, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 1:00pm - 2:00pm MDT
Maker's Space Classroom Wing
  Workshop, Vocational: Let Us

1:00pm MDT

Embroidery Machine Basics: A Peer-Led Workshop FULL
Wednesday April 23, 2025 1:00pm - 2:00pm MDT
Maker's Space
This one-hour, peer-led workshop is designed to give a hands-on introduction to the basics of using an embroidery machine, blending theory with practical demonstration and interactive learning  
ObjectivesBy the end of this workshop, participants will be able to:
  • Understand the fundamental components and operation of an embroidery machine.
  • Follow basic safety procedures when using the machine.
  • Prepare and load a simple embroidery design using the machine’s software.
  • Observe a live demonstration of the machine in action.
Speakers
avatar for Ms. ReNae Hammon ('25)

Ms. ReNae Hammon ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 1:00pm - 2:00pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

1:00pm MDT

Laser Engraving 101: A Peer-Led Workshop FULL
Wednesday April 23, 2025 1:00pm - 2:00pm MDT
Maker's Space
This 60-minute, peer-led workshop is designed to provide a hands-on introduction to laser engraving, ensuring that all participants gain both practical skills and an understanding of safe operation.
Objectives
     By the end of this workshop, participants will be able to:
  • Understand the basic operation and safety protocols of a laser engraver.
  • Identify key components of a laser engraving machine.
  • Safely operate the laser engraver to complete a small project.
Speakers
avatar for Mr. Jacob Dockstader ('26)

Mr. Jacob Dockstader ('26)

Junior, Centennial Academy
avatar for Mr. Caleb Timpson ('25)

Mr. Caleb Timpson ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Wednesday April 23, 2025 1:00pm - 2:00pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not
 
Thursday, April 24
 

10:00am MDT

Embroidery Machine Basics: A Peer-Led Workshop FULL
Thursday April 24, 2025 10:00am - 11:00am MDT
Maker's Space
This one-hour, peer-led workshop is designed to give a hands-on introduction to the basics of using an embroidery machine, blending theory with practical demonstration and interactive learning  
ObjectivesBy the end of this workshop, participants will be able to:
  • Understand the fundamental components and operation of an embroidery machine.
  • Follow basic safety procedures when using the machine.
  • Prepare and load a simple embroidery design using the machine’s software.
  • Observe a live demonstration of the machine in action.
Speakers
avatar for Ms. ReNae Hammon ('25)

Ms. ReNae Hammon ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Thursday April 24, 2025 10:00am - 11:00am MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

10:00am MDT

Laser Engraving 101: A Peer-Led Workshop FULL
Thursday April 24, 2025 10:00am - 11:00am MDT
Maker's Space
This 60-minute, peer-led workshop is designed to provide a hands-on introduction to laser engraving, ensuring that all participants gain both practical skills and an understanding of safe operation.
Objectives
By the end of this workshop, participants will be able to:
  • Understand the basic operation and safety protocols of a laser engraver.
  • Identify key components of a laser engraving machine.
  • Safely operate the laser engraver to complete a small project.
Speakers
avatar for Mr. Jacob Dockstader ('26)

Mr. Jacob Dockstader ('26)

Junior, Centennial Academy
avatar for Mr. Caleb Timpson ('25)

Mr. Caleb Timpson ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Thursday April 24, 2025 10:00am - 11:00am MDT
Maker's Space Classroom Wing
  Workshop, Vocational: Let Us

1:45pm MDT

3-D Printing FULL
Thursday April 24, 2025 1:45pm - 2:45pm MDT
Maker's Space
Attendees of the workshop will gain a thorough understanding of 3-D printing technology, including its principles, applications, components, and operation. They will learn how to utilize a 3-D printer safely and effectively, enabling them to create basic objects. Through hands-on activities and demonstrations, participants will develop the skills and confidence needed to utilize 3-D printing for their creative and technical projects in various industries.
Speakers
avatar for Mr. Levi Cawley ('27)

Mr. Levi Cawley ('27)

Sophomore, Centennial Academy
avatar for Mr. Nick Barlow ('27)

Mr. Nick Barlow ('27)

Sophomore, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Thursday April 24, 2025 1:45pm - 2:45pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

1:45pm MDT

Laser Engraving 101: A Peer-Led Workshop FILLING
Thursday April 24, 2025 1:45pm - 2:45pm MDT
Maker's Space
This 60-minute, peer-led workshop is designed to provide a hands-on introduction to laser engraving, ensuring that all participants gain both practical skills and an understanding of safe operation.
Objectives: By the end of this workshop, participants will be able to:
  • Understand the basic operation and safety protocols of a laser engraver.
  • Identify key components of a laser engraving machine.
  • Safely operate the laser engraver to complete a small project.
Speakers
avatar for Mr. Jacob Dockstader ('26)

Mr. Jacob Dockstader ('26)

Junior, Centennial Academy
avatar for Mr. Caleb Timpson ('25)

Mr. Caleb Timpson ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Thursday April 24, 2025 1:45pm - 2:45pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

2:00pm MDT

3-D Printing FULL
Thursday April 24, 2025 2:00pm - 3:00pm MDT
Maker's Space
Attendees of the workshop will gain a thorough understanding of 3-D printing technology, including its principles, applications, components, and operation. They will learn how to utilize a 3-D printer safely and effectively, enabling them to create basic objects. Through hands-on activities and demonstrations, participants will develop the skills and confidence needed to utilize 3-D printing for their creative and technical projects in various industries.
Speakers
avatar for Mr. Nick Barlow ('27)

Mr. Nick Barlow ('27)

Sophomore, Centennial Academy
avatar for Mr. Levi Cawley ('27)

Mr. Levi Cawley ('27)

Sophomore, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Thursday April 24, 2025 2:00pm - 3:00pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

2:00pm MDT

Cutting Edge Creations: A Vinyl Cutting Machine Workshop FULL
Thursday April 24, 2025 2:00pm - 3:00pm MDT
Maker's Space
This session led by student instructors has been crafted with the primary aim of providing attendees with a practical and immersive initiation into the realm of vinyl cutting. This workshop is structured to merge interactive discussions with hands-on demonstrations, ensuring that participants not only grasp the theoretical aspects but also get a firsthand experience of the vinyl cutting process. This 60-minute, student-led demonstration is designed to give a practical introduction to vinyl cutting, combining hands-on demonstration and interactive discussion.
Lesson Objectives: By the end of this workshop, participants will be able to:
  • Understand the primary functions and components of a vinyl cutting machine.
  • Follow safety protocols and proper handling procedures.
  • Observe a live demonstration of the vinyl cutting process.
Speakers
avatar for Ms. Summer Jeffs ('27)

Ms. Summer Jeffs ('27)

Sophomore, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Thursday April 24, 2025 2:00pm - 3:00pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not

2:00pm MDT

Embroidery Machine Basics: A Peer-Led Workshop FULL
Thursday April 24, 2025 2:00pm - 3:00pm MDT
Maker's Space
This one-hour, peer-led workshop is designed to give a hands-on introduction to the basics of using an embroidery machine, blending theory with practical demonstration and interactive learning  
ObjectivesBy the end of this workshop, participants will be able to:
  • Understand the fundamental components and operation of an embroidery machine.
  • Follow basic safety procedures when using the machine.
  • Prepare and load a simple embroidery design using the machine’s software.
  • Observe a live demonstration of the machine in action.Ebroider
Speakers
avatar for Ms. ReNae Hammon ('25)

Ms. ReNae Hammon ('25)

Senior, Centennial Academy
MM

Ms. Maureen Timpson ('94)

Faculty, Centennial Academy
Thursday April 24, 2025 2:00pm - 3:00pm MDT
Maker's Space Classroom Wing
  Workshop, Design Art: Fear Not
 
Share Modal

Share this link via

Or copy link

Filter sessions
Apply filters to sessions.
Wednesday, April 23
Thursday, April 24
Atrium
Brother Knudson's
Brother Ray Timpson's Courtyard and Studio
Brother Timpson's
Chapel
Maker's Space
Room 2: The Sewing Room
Room 3: The Craft Room
Room 5: Mathematics
Room 6
Room 7
Room 8
The Cafe
The Court
The Great Outdoors
The Patio
The Science Lab
The Speech Room
The Study
  • Activity
  • Keynote
  • Lecture
  • Student Speaker
  • Tournament
  • Workshop
  • Audience
  • All
  • High School
  • Subject
  • Beginner and Intermediate
  • Popular